BXMQM - 72-00040 TWO PART CONDUCTIVE CARBON SILICONE ADHESIVE

  • MSDS: BXMQM
  • Manufacturer: TECHNICAL WIRE PRODUCTS INC
  • Product Name: 72-00040 TWO PART CONDUCTIVE CARBON SILICONE ADHESIVE
  • National Stock Number: 8040-00F040911
Product Identification

Product ID:72-00040 TWO PART CONDUCTIVE CARBON SILICONE ADHESIVE
MSDS Date:10/01/1987
FSC:8040
NIIN:00F040911
Kit Part:Y
MSDS Number: BXMQM

Responsible Party
TECHNICAL WIRE PRODUCTS INC
129 DERMODY ST
CRANFORD, NJ 07016-3217
US

Emergency Phone: 201-272-5500

Info Phone: 201-272-5500

Cage: 53217

Contractor
TECHNICAL WIRE PRODUCTS INC, DBA. TECKNIT
CRANFORD, NJ 07016 US

Telephone: 908-272-5500

Cage: 07700

Ingredients

GAMMA-AMINOPROPYLTRIETHOXYSILANE

Fraction By Weight: 100%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HEADACHE, NAUSEA, DIZZINESS
Effects of Overexposure:HEADACHE, NAUSEA, DIZZINESS
Medical Cond Aggravated by Exposure:EMPHYSEMA

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR & RESTORE BREATHING IF
NEEDED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:OC
Flash Point:220F
Extinguishing Media:EXCLUDE AIR, USE FOAM, CO2, WATER SPRAY, DRY
CHEMICALS.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SCRAPE/WIPE UP W/ABSORBENT MATERIALS. WIPE UP
SOLVENTS (TETRACHLOROETHYLENE/TRICHLOROETHYLENE) WILL HELP.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED TIGHTLY & STORE
AT ROOM TEMP/BELOW WHEN NOT IN USE.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL): SUFFICIENT TO MAINTAIN
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NONE REQUIRED
Work Hygienic Practices:KEEP WORK AREA CLEAN & MAINTAIN GOOD
VENTILATION.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:428F
Vapor Pres:<1
Vapor Density: 7.7
Spec Gravity:0.95
Evaporation Rate & Reference:(BU AC =1): <0.1
Solubility in Water:REACTS
Appearance and Odor:COLORLESS CLEAR LIQUID W/LITTLE/NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
WATER, GREASE, OIL
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:CO, INCOMPLETE OXIDATION PRODUCTS.
Conditions to Avoid Polymerization:HEAT, SPARKS, OPEN FLAMES.

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.